Quick . QUICK USA

Quick PTR 350 Pontoon windlass with stainless steel bow roller and 20 lb Anchor Part #: FSPT0350RA18C01 "On-deck" or "Under-deck" windlass The Quick bow-roller is specifically designed to weigh anchor safely, thanks to a system blocking the anchor when it is up. The kit includes the PTR, stainless steel AISI 316 (BR X), bow-roller and high yield rope (Dyneema), and rubber coated 20 lb River Anchor. Features Motor power: 150 W Motor supply voltage: 12 V Maximum pull: 260 Kg Maximum working load: 100 Kg Working load: 40 Kg Current absorption @ working load (1) 13 A Maximum chain speed (2) 20,8 m/min Maximum chain speed @ working load (2) 19,3 m/min 98' of rope 3 year warranty

Quick Radio Remote Control Receiver 913Mhz Features Number of relays - 2 Full power range (from 10.5 to 31Vdc). Relay current carring capacity - 15 A Power absorption in stand-by mode - 25 mA Microcontroller-operated functions. FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Indication of the system operating status, errors and problems by means of LED and seven-segment display Protection against polarity inversion Protection against low battery 50 transmitters can be stored Translation mode to activate more receivers, installed in different spots, by means of one transmitter Programmable digital filter

QUICK BOW THRUSTER BTQ 140-40 12V 40KGF D140MM 2.2KW KIT

QUICK HRC1002L LIGHTED BUTTON REMOTE

Anchor chain and rope connected, purpose built to fit into Quick gypsy's.An anchor-rode is the connection system between anchor and boat, and its sturdiness during mooring is undoubtedly essential. The critical point of the rope and chain combination is the joint, or technically speaking, the splice. In Quick's Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain. Quick's Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life. Features a calibrated hot dipped galvanised chain, first choice 3-strand polyester rope, and low & high strength catena.

Nautic Boiler B3 - 5.3 Gallon - 12V - 300WCasing in composite material and Tank in Aisi 316 stainless steel.Benefits:High quality materialsHeat exchanger with wide exchange surfaceProduces hot water from the electric element, that is fitted with an adjustable safety thermostatRelief/non-return vale that allows discharging of the water heater in case of disuseFeatures:The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures.The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.The electrical heating element is made of Incoloy®.The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties.Included Accessories:Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.