Earthworks . FW730/HC-TPBMP

EARTHWORKS FW730/HC-TPBmp | Hypercardioid 7ft model

7 Foot Hypercardioid FlexWand with tripod base matched pairThe FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit It allows the microphone head to be positioned as high as 7 feet and as low as 10 inches from the floor or anywhere in between depending on the model There are no visible wires or cables above floor level Visually it is low profile smooth sleek and clean The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required Now you dont have to find a mic attach the mic clip to the stand and then dress the cable around the stand Just pick up the FlexWand position it and plug the mic cable into the base Features. Uniform frequency response on or off axis. Frequency response of 30Hz to 30kHz. Near perfect polar response and the ability to reject sounds from the rear of the microphone making it a perfect solution for choirs and vocal groups. Large flex section near the center of the stand that couples the stand and the wand. Minigooseneck between the end of the wand and the microphone head. Substantial improvement in gain before feedback. They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone. Ideal where bands or orchestras are placed in front of a choir as the FlexWand will reject much of the sound of the band or orchestra. The sturdy 12 pound cast iron base will not allow the FlexWand to be accidentally knocked overIncludes. SRW3 Foam Windscreen for FlexWands SR25. LP1530 LevelPad switchable 15 or 30db. FWTCB Tripod base for all FlexWand models. FWCIB Cast Iron base for all FlexWand models. FWEXT2 Two foot extension. FWEXT3 Three foot extensionSpecifications. Size 7 ft. Frequency Response 30Hz to 30kHz 2dB at 6 inches 15cm. Polar Pattern Cardioid or Hypercardioid. Sensitivity 10mVPa 40dBVPa. Power Requirements 48V Phantom 10mA. Max Acoustic Input 145dB SPL. Output XLR pin 2. Output Im