Walter F4171-5 | Chucking Reamer 5mm 6 Flute Carbide | 49L958 | Raptor Supplies Worldwide

Right-hand spiral-flute carbide chucking reamers pull chips out of a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. They are used for reaming blind holes and are suitable for applications with interrupted cuts, such as keyways. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. The bright finish on these carbide reamers is unaffected when the reamers' cutting edges are resharpened. The reamers' Morse taper shank can be directly inserted into the spindle of a compatible drill press or lathe or into an adapter such as a Morse taper sleeve or socket. For these reamers, reamers that are 16mm or smaller are made from solid carbide, and reamers that are larger than 16mm are carbide-tipped. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Metric Reamer Size 5.00 mm Decimal Equivalent 0.1969 Shank Type - Machining Taper Shank Dia. MT1 Flute Type Spiral Number of Flutes 6 Flute Length 23.00 mm Spiral Direction Left Hand Coolant Fed Non-Coolant Through Overall Length 133.00 mm Material - Machining Carbide Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Chamfer Angle 45 Degrees Primary Material Application All Materials Secondary Material Application All Materials Primary Material Application ISO Code K, M, N1, N3, N4, O, P3, S Secondary Material Application ISO Code H, K Reamer Application Through Hole Material Applications Aluminum, Brass, Bronze, Carbon Fiber, Cast Iron, Copper, Glass, Graphite, Heat-Resistant Alloys, Magnesium, Plastic, Stainless Steel, Steel Size - Decimal 5.00mm - 0.1969