FeaturesEnclosed gearbox design provides smooth, quiet operationFast, easy speed changesHardened and ground gears are featured in the headstock and gearboxD1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearingsHeadstock is constantly oiled during operationGearbox gives wide inch threading and feed capabilities with no gear changesV-way bed design is induction hardened and groundGap bed design section provided for larger diameter workIndependent leadscrew and feed rodSpinde actuation control is apron mountedCompound and cross slide have backlash eliminationAdjustable gibs are incorporated in the carriage and slidewaysTailstock may be offset for turning tapers and includes an inch-metric graduated quillIncludesGHB-1340A Lathe with ACU-RITE 200S DRO and Taper Attachment Installed - 3211236-in 3-Jaw Direct Mount Chuck with Top Reversing Jaws8-in 4-Jaw Chuck12-in Face Plate4-Way Tool PostSteady and Follow RestMetric Change GearSplash GuardCenters and Headstock Center SleeveThreading DialTool Box and ToolsSpecificationsWeight: 1215 lbs.Carriage Travel: 35-inCompound Slide Travel: 2-11/16-inCross Slide Travel: 6-5/16-inFollow Rest Capacity: 2-3/4-inHorsepower: 2Maximum Tool Size: 5/8-in x 5/8-inMotor Type: Single PhaseNumber of Inch Threads: 40Number of Spindle Speeds: 8Pre-Wired: 230VRange of Cross Feeds: 0.0012 - 0.0345 in/rev.Range of Inch Threads: 4 - 112 TPIRange of Longitudinal Feeds: 0.0036 - 0.0325 in/rev.Range of Spindle Speeds: 70 - 2,000 RPMSpindle Bore: 1-1/2-inSpindle Mount: D1-4Spindle Taper with Sleeve: MT-5 (MT-3)Steady Rest Capacity: 2-5/8-inSwing Over Bed: 13-inSwing Over Cross Slide: 7-25/32-inSwing Through Gap: 18-3/4-inTailstock Spindle Travel: 3-3/4-inTaper in Tailstock Spindle: MT-3Voltage: 230VWidth of Bed: 7-3/8-in

FeaturesEnclosed gearbox design provides smooth, quiet operationFast, easy speed changesHardened and ground gears are featured in the headstock and gearboxD1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearingsHeadstock is constantly oiled during operationGearbox gives wide inch threading and feed capabilities with no gear changesV-way bed design is induction hardened and groundGap bed design section provided for larger diameter workIndependent leadscrew and feed rodSpinde actuation control is apron mountedCompound and cross slide have backlash elimi