Primacoustic . Z900 0120 08

This Primacoustic Broadway acoustic room kit is designed for rooms that are approximately 120 square feet (11 sq./meters). The sound control kit follows a variant of the LEDE concept (live-end, dead-end) whereby the source or transmit section of the room has greater dampening while the receive section is sparsely treated to preserve natural room ambiance.Primacoustic makes treating your room easy with a selection of pre-made and cost effective sound treatment kits. Each kit contains everything you need to address room problems such as primary reflections, flutter echo, standing waves and excessive bass. Configurations are available for a variety of typical room acoustic situations.. The Broadway London 12 room kit is designed for rooms up to 150 sq. ft. (13.9 sq m), or can be combined with other products to treat larger spaces. Ideally suited for studio control rooms and home theaters, these easy to use kits can be a single box acoustic treatment solution. The London 12 contains Broadway panels that tackle problems affecting any room, such as primary reflections, flutter echo, standing waves and excessive bass. In addition to acoustic panels, each London 12 room kit includes the corresponding mounting hardware and instructions for easy installation. Broadway panels are made from high-density 6lb per cubic foot fiberglass, offering nearly five times greater absorption than typical low cost foam alternatives. This means that you get more absorption with less panels, while assuring an even absorption curve throughout the frequency range. The London 12 room kit has 22 panels included. The London 12 room kit includes: 2 Broadband Panels (24" x 48" x 2") with beveled edges 8 Control Columns (12" x 36" x 2") with beveled edges 12 Scatter Blocks (12" x 12" x 1") with beveled edges 28 Surface Impaler clips for mounting the Control Columns and Scatter Blocks 8 Corner Impaler clips for mounting London Bass Trap panels Drywall anchors and screws included"