Dixon N4S6-B-LS Dix-Lock® N-Series Interchange Male End x Hose Barb Safety-Lock Plug | MROSupply.com

' Quick Coupler Plug, Bowes Quick Connect Air Coupling Interchange Type, Hose Barb Quick Connect Air Coupling Hose Connection, Quick Connect Air Coupling Body Size 1/2 In., Quick Connect Air Coupling Barb Size 3/4 In., Quick Connect Air Coupling Max. Pressure 300 psi, Quick Connect Air Coupling Locking Type Sleeve, Brass, Buna-N Quick Connect Air Coupling Seals, Max. Flow 204 cfm, Temp. Range -40 Degrees to 250 Degrees F, Application On End of Hose or Pipe '

N4S6-B-LS , Dix-Lock™ N-Series Interchange Male End x Hose Barb Safety-Lock Plug Specifications Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 Bar) Maximum Working and 8,200 PSI (865 Bar) Burst Conforms to MIL-C-3486 and A-A-50431A standards Construction Machined components are manufactured using solid bar stock. Stainless steel retaining ring and spring maximize corrosion resistance and extend service life. Steel componentry is plated using ROHS Compliant Trivalent Chrome. Coupling sleeve constructed of cast zinc steel Aluminum lock ring Compatibility & Interchange Data Bowes Interchange Bayonet Style Interchangeable with Bowes 51000-Series, National Series 'B', MacDonald Quick-Action, Campbell Single-Lock Safety Notes Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application. Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death. It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.