Feed in Steel = 0.08 mm/rev. (page 1 / 1)

Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 31.4 mm Overall length L: 65 mm Shank dia Ds: 3.1 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 33.8 mm Overall length L: 70 mm Shank dia Ds: 3.5 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 37.2 mm Overall length L: 75 mm Shank dia Ds: 3.9 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 40.1 mm Overall length L: 80 mm Shank dia Ds: 4.6 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 40.6 mm Overall length L: 80 mm Shank dia Ds: 4.3 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Similar to DIN 338. Nominal dia and shank dia equal. TiAlN coating for even better performance. Note: Flute length LC = L2 + 1.5 x DC. Non slip clamping in drill chuck No. 341050 with diamond coated jaws. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 48.2 mm Overall length L: 93 mm Shank dia Ds: 5.9 mm Feed f in steel < 1100N/mm2: 0.08 mm/rev.
Solid Carbide Jobber Drill, 3 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 3.3 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 3.6 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 3.8 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 4 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 4.1 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 4.7 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 4.9 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 5 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 5.4 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 5.5 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 5.7 mm Dia, 118 Deg Point Angle, TiAlN Coated
Solid Carbide Jobber Drill, 5.8 mm Dia, 118 Deg Point Angle, TiAlN Coated