Typical Use:

Automatically mix 2-part material (epoxies, silicones, urethanes, acrylics) while dispensing.

Automatically mix 2-part material (epoxies, silicones, urethanes, acrylics) while dispensing; suitable for all types of meter, mix and dispensing systems.

General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.

Needle used in liquid dispensing.

Nozzle used in liquid dispensing.

Sealing openings in modules and housings; adding mechanical stability to individual components; assembly of components on PWBs; sealing in and around wires and electrical leads; yoke assembly.

Smooth Flow Tapered Tips are plastic tips designed to dispense medium to high viscosity materials such as epoxy, silicone, RTV, sealants, grease, and other adhesives quickly and easily.

Substrates such as wood, plastics, metal, rubber, or other materials are bonded quickly with the Cynergy 6000 series.

Used for bonding high, medium, and low surface energy substrates such as metals, composites, and plastics.

Used for bonding metals and other high surface energy materials with high temperature resistance, making it ideal for high temp paint processing.

Used for corrosion, chemical, and moisture protection for electrical components and printed circuit boards as well as anti-stiction and anti-wetting for many diverse applications.

Used for dispensing low to high viscosity fluids in general purpose dispense applications.

Used for fluid dispensing.

Used for interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.

Used for mounting and trim attachment, panel-to-frame bonding, and small joint assembly.

Used for structural bonding of metal, thermoplastic, and composite assemblies.

Used in fluid dispensing for sensitive electronic components.

Used in fluid dispensing.

Used in interior and exterior industrial applications, often replacing rivets, spot welds, liquid adhesives, and other permanent fasteners.

Used to automatically mix 2 part adhesives during application.

Used to bond a wide variety of high and medium surface energy substrates, plasticizer resistant.

Used to bond high surface energy substrates with the convenience and simplicity of a tape fastener.

Used to bond to a wide variety of smooth plastics and paints, including applications like stiffener bonding, polycarbonate lens sealing over LCDs, and mounting vinyl wiring ducts and conduit channels.

Used when difficult to bond and acidic surfaces are used such as EPDM, plasticized materials such as PVC, wood.

Used with medmix MIXPAC