The Fiberplex <b>RMC-3101</b> provides up to nine available slots for any fiber optic isolator or telephone disconnect unit. The tenth available slot must be occupied by a PSM-3010 power supply module. Each RMC-3101 will be shipped with one PSM-3010. A second PSM-3010 may also be added for power redundancy, leaving eight available slots for any fiber optic isolator. If the first PSM-3010 fails, the second PSM-3010 will take over the entire load and carry on normally. A cable bay is provided below the module bay for cable routing and enhanced air fl ow through two rear exhaust fans and a vented front panel.</p><p>An RMC-3102 is identical to the RMC-3101 with the addition of an optical patch bay mounted on the rear.</p><p>Each fiber optic isolator must also be accompanied by a CMA-3002 chassis mount adapter, which slides the fi ber optic isolator into the slot and assures correct alignment of the isolator power connector to the power bus inside the RMC-3101.</p><p>FiberPlex recommends the RMC-3101R for TEMPEST or other high security applications.</p>