Allied Electronics & Automation, part of RS Group - Page Not Found

The ES-U-2016-RM is a 16-port USB-to-Serial Adapter. It allows quickly allows the addition of sixteen RS422 / RS485 serial communication ports to your system by connecting to a single USB port. Each of the 16 ports can be individually configured to RS422 or RS485 modes using DIP switches. The adapter has a built-in power supply (100V - 240V input) and can be mounted on a DIN rail or in a 19” rack using the supplied brackets. The ES-U-2016-RM is compatible Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Server 2012, 2008, Mac, Linux and WinCE (4.2 – 7.0). Features: Adds sixteen serial ports by connecting to a single USB port (USB 1.1 or 2.0) DIP switches allow each port to be individually configured for RS485 full-duplex, RS485 half-duplex or RS422 modes Industry standard FTDI FT4232H chipset and drivers Virtual Com Port drivers make all ports appear as standard Windows COM ports COM port number is selectable for each port) Internal FIFO buffers (1Kbyte transmit buffer and 1Kbyte receive buffer per port) Automatic transmit buffer control for 2-wire RS485 half-duplex operation Serial port baud rates up to 1 Mbps with non-standard rates supported Sixteen DB9 male serial connectors RS422 signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS- RS485 signals: Full-duplex: Tx-, Tx+, Rx+, Rx-, GND Half-duplex: data-, data+, GND Selectable internal 120 Ohm termination resistors for Tx, Rx and CTS termination Internal 750 Ohm biasing resistors for Tx and Rx biasing selectable by jumper 15 KV ESD surge protection Two LEDs per port indicate data transmit and receive (0.9 meter USB cable included) Built-in switching power supply (100V - 240V input) SECC sheet metal chassis with 19in rack mount kit supplied; DIN rail bracket available separately Dimensions: 429 mm x 152 mm x 44 mm / Dimensions with DIN rail brackets: 451 mm x 152 mm x 44 mm