RS - Page Not Found

The ES-U-3016-RM is a 16-port USB to Serial Adapter. It allows the addition of sixteen RS232 / RS422 / RS485 serial communication ports to your system by connecting to a single USB port. 16 ports can be individually configured to RS232, RS422 or RS485 modes using DIP switches. The adapter has a built-in power supply (100 V - 240 V input) and can be mounted on a DIN rail or in a 19” rack using the supplied brackets. Features: · Adds sixteen serial ports by connecting to a single USB port (USB 1.1 or 2.0) · DIP switches allow each port to be individually configured for RS232, RS485 full-duplex, RS485 half-duplex or RS422 modes · Industry standard FTDI FT2232D chipset and drivers · Virtual Com Port drivers make all ports appear as standard Windows COM ports · COM port number is selectable for each port · 128 byte transmit buffer and 384 byte receive buffer per port · Full hardware and software flow control · Automatic transmit buffer control for 2-wire RS485 half-duplex operation · Serial port baud rates up to 1 Mbps with non-standard rates supported · Sixteen DB9 male serial connectors · RS232 signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND RS422 signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS- RS485 signals: Full-duplex: Tx-, Tx+, Rx+, Rx-, GND Half-duplex: data-, data+, GND · Selectable internal 120 Ohm resistors for Tx, Rx and CTS termination · Internal 750 Ohm biasing resistors for Tx and Rx biasing selectable by jumper · ESD surge protection (15 KV) · Two LEDs per port indicate data transmit and receive · 0.9 meter USB cable included · Built-in switching power supply (100 V - 240 V input) · SECC sheet metal chassis with DIN rail brackets and 19in rack mount kit · Dimensions: 429 mm x 152 mm x 44 mm / Dimension with DIN Rail Brackets: 451 mm x 152 mm x 44 mm