RaceQuip 711011 5PT HARNESS SET L&L

RaceQuip’s Latch & Link 5-point auto racing harness set has twin individual shoulder harness and is manufactured using premium 3" polyester webbing and drop forged steel hardware to exceed the SFI 16.1 rating. Shoulders adjust from 20" to 62" and the lap harness adjusts from 20" to 60". All RaceQuip 711 series harness come as a "pull down lap" design, which means that the lap harness must be pulled down and away from the center latch & link buckle mechanism to tighten. All RaceQuip Latch & Link motorsports harness sets are distinguished by a pivoting "hammer," called a Duckbill, which is located on the lap harness and locks all of the harness into place by snapping down into a detent. Both shoulder harness and the sub-harness are hooked over the link; the link is inserted into the latch on the lap harness; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place. Since RaceQuip harness sets are "double adjustable", lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the harness by either wrapping them around a rollbar or by bolting them in place with the supplied ends (bolts not included). Snap hook ends and eyebolts are sold separately if the user wishes to install harness in that manner. NOTE: RaceQuip harness sets are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set. Available in black, red, blue, yellow, purple, platinum, green, pink, and orange - one "set" of harnesses equals one seat.