Magnate M99T58T3 Meat Bandsaw Blade, 99" Long - 5/8" Width; 3 Tooth; 0.022" Thickness; 1 Count/Pack;

All Magnate bandsaw blades are welded and fabricated in the USA, but the coils/material of the bandsaw blades may or may not be from the USA. Typically, the coils are from either USA or Brazil. The picture depicted represents one blade. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when uncoiled. Wear leather gloves and eye protection while using extreme care when uncoiling the blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to the ownerâ€s/operation manual to make sure the bladeâ€s width will fit the machine. Note: If your bandsaw is not on this list and is able to take these blade lengths, please contact us. 98 inch ( 8 ft. 3 inch, 8' 3" ) meat bandsaw blades suit the following models: Skyfood SKEX If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Uncoil your blade, and use a soft cloth measuring tape to accurately measure the length of your blade. 4 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Note: Upon request, Magnate makes blades of any length and types to fit your brand and model.