<p>The Plexus 30000 is a structural adhesive with a physical form of paste.</p><b>The Plexus 30000 Specifications: </b><br><ul><li> Brand: Plexus?<li> Product Type: Structural Adhesive<li> Material Compatibility: Thermoplastic Metal Composite<li> Acrylic Type: Methacrylate<li> Color: Off-White Straw<li> Primary Color: Off-White Yellow<li> Physical Form: Paste<li> Viscosity Measurement: 40000 to 70000cP<li> Chemical Composition: Methacrylic Acid, Methyl Methacrylate Monomer<li> Specific Gravity: 1.03<li> VOCs Content: <10g/L<li> Flash Point: 51?F<li> Odor: Fragrant<li> Shear Strength: 3000 to 3800psi<li> Mix Ratio: 1:1<li> Container Capacity: 400ml<li> Container Type: Twin Cartridge<li> Applications: Bonding</ul>

Plexus MA300 (30000) is a two-part 1:1 mix ratio, methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Combined at a 1:1 ratio, MA300 has a working time of 3 to 6 minutes and reaches approximately 500 psi in 12 minutes and 1000 psi in 15 minutes at 74°F (23°C). This product offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials. Plexus MA300 is supplied in ready-to-use 50-ml and 400-ml cartridges, 5-gallon (20-liter) pails, or 50-gallon (200-liter) drums to be dispensed as a non-sagging gel. Plexus MA300 replaces an older popular Devcon formula Plastic Welder (14320). It is the same formula inside, but is now branded under the ITW Plexus name. Characteristics Room Temperature Cure Working Time 3 – 6 minutes Fixture Time 12 – 15 minutes Operating Temperature -67°F – 250°F (-55°C – 121°C) Gap Filling 0.03 in. – 0.125 in. (0.75 mm – 3.2 mm) Mixed Density 8.10 lbs/gal (0.97 g/cc) Flash Point 51°F (11°C) Chemical Resistance Excellent resistance to: Hydrocarbons, Acids and Bases (pH 3-10), Salt Solutions Susceptible to: Polar Solvents, Strong Acids and Bases

Plexus MA550 (35000X) has some amazing performance features. It's a Non-Sag UV Stable White Marine-grade MMA adhesive, that provides excellent chemical and wet resistance, Will not fade or degrade under extended UV exposure, and gives a toughened, sock-resistant bond to most thermoplastics, metals, and composites. Combined at a 10:1 ratio, MA550 has a working time of 45 minutes and reaches approximately 75% strength in 75 minutes (1 hour 15 minutes). This product offers a unique combination of high strength, high impact resistant, high toughness, high resistance to fatigue, and high UV stability, also in a white color. Plexus MA550 is supplied in larger 490ml cartridges, 5-gallon (20-liter) pails, or 50-gallon (200-liter) drums. Recommended for Materials: ABS, Acrylics, FRP (fiberglasses), Gelcoats, PVC, Polyesters (including DCPD modified), Styrenics, Urethanes, Vinyl Esters Characteristics: Room Temperature Cure Working Time 45 - 50 minutes Fixture Time 70 - 75 minutes Operating Temperature -40°F to 250°F (-40°C to 121°C) Gap Filling 0.03 in. – 0.375 in. (0.75 mm – 10 mm) Mixed Density 8.19 lbs/gal (0.98 g/cc) Flash Point 51°F (11°C) Chemical Resistance: Excellent resistance to: Acids and Bases (pH 3-10), Salt Solutions Susceptible to: Polar Solvents, Strong Acids and Bases, Hydrocarbons (including gasoline and diesel fuels)