DAYTON . 7C038

Single-Inlet Forward Curve Direct-Drive Blowers Housing can be rotated to 8 discharge positions in each rotation Welded steel construction Gray baked-on epoxy finish Max. inlet air temp.: 180°F Max. ambient temp.: 104°FProvide high-volume ventilation when duct systems are required. Motor packed separately when ordered with blower.Note: Review OSHA codes. OSHA complying guards are required where fan blades are exposed and within reach of personnel.<br /><br /> Item: Blower<br /> Type: With Motor<br /> Wheel Dia. (In.): 7-3/4<br /> CFM @ 0.000-In. SP: 985<br /> CFM @ 0.125-In. SP: 920<br /> CFM @ 0.250-In. SP: 870<br /> CFM @ 0.500-In. SP: 765<br /> CFM @ 0.750-In. SP: 655<br /> CFM @ 1.250-In. SP: 360<br /> dBA @ 5 Feet: 57<br /> Blower RPM: 1725<br /> Max. Inlet Temp. (Deg. F): 180<br /> Max. Ambient Temp. (F): 104<br /> Voltage: 115<br /> Hz: 60<br /> Phase: 1<br /> Full Load Amps: 5.8<br /> Motor HP: 1/3<br /> Motor RPM: 1725<br /> Motor Type: Split Phase<br /> Motor Enclosure: Open Dripproof<br /> Bearing Type: Sleeve<br /> Height (In.): 16<br /> Width (In.): 15<br /> Depth (In.): 14<br /> Inlet Dia. (In.): 8<br /> Outlet Height (In.): 8-1/4<br /> Outlet Width (In.): 5-3/8<br /> Wheel Width (In.): 3-7/8<br /> Wheel Bore (In.): 1/2<br /> Wheel Material: Steel<br /> Rotation: CW Viewing Drive Side<br /> Housing Material: Steel<br /> Housing Finish: Gray Polyester Epoxy<br /> Assembled/Unassembled: Unassembled<br />