DAYTON . 7AP88

High-VolumeGreat for medium pressures; combine characteristics of high-volume and high-pressure blowers. 16-ga. steel housing with welded, airtight joints. Heavy steel wheel. All motors are rigid mounted.Single-Inlet Forward Curve Direct-Drive Blowers Housing can be rotated to 8 discharge positions in each rotation Welded steel construction Gray baked-on epoxy finish Max. inlet air temp.: 180°F Max. ambient temp.: 104°FProvide high-volume ventilation when duct systems are required. Motor packed separately when ordered with blower.Note: Review OSHA codes. OSHA complying guards are required where fan blades are exposed and within reach of personnel.<br /><br /> Item: Blower<br /> Type: With Motor<br /> Wheel Dia. (In.): 9<br /> CFM @ 1.500-In. SP: 1390<br /> CFM @ 1.75-In. SP: 1250<br /> CFM @ 2.000-In. SP: 1050<br /> dBA @ 5 Feet: 58<br /> Blower RPM: 1725<br /> Max. Inlet Temp. (Deg. F): 180<br /> Max. Ambient Temp. (F): 104<br /> Voltage: 115/230<br /> Hz: 60<br /> Phase: 1<br /> Full Load Amps: 14.0/7.0<br /> Motor HP: 1<br /> Motor RPM: 1740<br /> Motor Type: Capacitor-Start<br /> Motor Enclosure: Totally Enclosed Fan-Cooled<br /> Bearing Type: Ball<br /> Height (In.): 18<br /> Width (In.): 16<br /> Depth (In.): 15<br /> Inlet Dia. (In.): 9<br /> Outlet Height (In.): 10-3/4<br /> Outlet Width (In.): 6-1/2<br /> Wheel Width (In.): 4-1/2<br /> Wheel Bore (In.): 7/8<br /> Wheel Material: Steel<br /> Rotation: CW Viewing Drive Side<br /> Housing Material: Steel<br /> Housing Finish: Gray Polyester Epoxy<br /> Assembled/Unassembled: Unassembled