Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Unassembled, Wheel Diameter 9 in, Airflow @ 0.000 in SP 1,005 cfm, Airflow @ 0.125 in SP 968 cfm, Airflow @ 0.250 in SP 930 cfm, Airflow @ 0.375 in SP 890 cfm, Airflow @ 0.500 in SP 850 cfm, Airflow @ 0.750 in SP 773 cfm, Airflow @ 1.000 in SP 680 cfm, Airflow @ 1.250 in SP 480 cfm, Airflow @ 1.500 in SP Not Applicable, Airflow @ 2.000 in SP Not Applicable, Airflow @ 2.500 in SP Not Applicable

Single-Inlet Forward Curve Direct-Drive Blowers Housing can be rotated to 8 discharge positions in each rotation Welded steel construction Gray baked-on epoxy finish Max. inlet air temp.: 180°F Max. ambient temp.: 104°FProvide high-volume ventilation when duct systems are required. Motor packed separately when ordered with blower.Note: Review OSHA codes. OSHA complying guards are required where fan blades are exposed and within reach of personnel.<br /><br /> Item: Blower<br /> Type: With Motor<br /> Wheel Dia. (In.): 9<br /> CFM @ 0.000-In. SP: 1005<br /> CFM @ 0.125-In. SP: 968<br /> CFM @ 0.250-In. SP: 930<br /> CFM @ 0.500-In. SP: 850<br /> CFM @ 0.750-In. SP: 773<br /> CFM @ 1.250-In. SP: 480<br /> dBA @ 5 Feet: 58<br /> Blower RPM: 1725<br /> Max. Inlet Temp. (Deg. F): 180<br /> Max. Ambient Temp. (F): 104<br /> Voltage: 208-230/460<br /> Hz: 60<br /> Phase: Three<br /> Full Load Amps: 1.5-1.6/0.8<br /> Motor HP: 1/3<br /> Motor RPM: 1725<br /> Motor Type: 3-Phase<br /> Motor Enclosure: Open Dripproof<br /> Bearing Type: Ball<br /> Height (In.): 18<br /> Width (In.): 16<br /> Depth (In.): 15<br /> Inlet Dia. (In.): 9<br /> Outlet Height (In.): 10-3/4<br /> Outlet Width (In.): 6-1/2<br /> Wheel Width (In.): 4-1/2<br /> Wheel Bore (In.): 1/2<br /> Wheel Material: Steel<br /> Rotation: CW Viewing Drive Side<br /> Housing Material: Steel<br /> Housing Finish: Gray Polyester Epoxy<br /> Assembled/Unassembled: Unassembled<br />