PWM400-10-American Control Electronics-DC

<p><ul><li>Traditional ACE mounting pattern and footprint</li><li>Accepts AC or DC input in the 115–230V range with no switches to set</li><li>Inhibit (NO) for coasting to a stop, can be used for rapid starting and stopping</li><li>Diagnostic LEDs: Power, current limit</li><li>1.05 form factor</li><li>1% base speed regulation</li><li>100:1 speed range</li><li>Trim pots: Maximum speed, minimum speed, acceleration/deceleration, current limit, IR compensation</li></ul></p><p><b>Specifications: </b><ul><li>Horsepower:-2 hp</li><li>Drive Input Voltage:-115/230 V ac</li><li>Drive Input Phase:-1 ph</li><li>Drive Output Voltage:-130/240 V dc</li><li>Drive Type:-Non-Regenerative</li><li>Enclosure Rating:-IP-00</li><li>Function of Controller:-Run/Stop</li><li>Frequency Rating:-50/60 Hz</li><li>Enclosure Type:-Chassis</li><li>Min Horsepower:-1/4 hp</li><li>Max Horsepower:-2 hp</li><li>Max Current:-10 A</li><li>Continuous Current:-10 A</li><li>Peak Current:-10 A</li><li>Ambient Temperature Range:-50 to 104 F</li><li>Brake Type:-None</li><li>Braking:-No</li><li>Standards Met:-UL Recognized, CSA</li></ul></p>