1202129L1 - Adtran TSU 120e

The TSU 120e is a modular, full-featured T1-FT1 DSU/CSU designed to support a wide range of end-user applications. Equipped with both a synchronous V.35 DTE interface and a DSX-1 PBX port, the TSU 120e supports applications combining digital voice and high speed data. As interface requirements increase, the flexibility of the TSU 120e benefits the user with modularity through its expansion slot. The TSU 120e provides complete monitoring and control of the T1 network with embedded Simple Network Management Protocol provided through both a SLIP and a 10BaseT Ethernet interface. To support critical data applications, the built-in V.35 interface on the TSU 120e can be converted to provide dial backup functionality during T1 failure conditions. This feature is supported by the interface and is available using an optional V.35 "Y" cable. Support for future growth, through the units single expansion slot, is a key feature of the TSU 120e. The ability to combine many types of plug-in and plug-on modules provides extensive combinations of voice and data interfaces. Several data modules are available for single and dual-port access to Frame Relay, DDS or Basic Rate ISDN services provided over T1 facilities. Voice modules are also easily integrated allowing access to analog voice circuits or additional PBX connections. As a fully functional T1 Multiplexer, the TSU 120e supports all mixed-mode networking applications providing termination for circuits containing voice, data and video channels. Configuration and management of the TSU 120e is available through a variety of methods. The TSU 120e supports SNMP with Gets, Sets and Traps functionality through a built-in Agent. ADTRAN MIBs support management for the TSU 120e and all installed expansion modules. For access to SNMP features, the TSU 120e has both a 10BaseT Ethernet and a SLIP (EIA-232) connection. In addition to SNMP, the unit utilizes the management capabilities found in optional software products from ADTRAN. For Wi

100% Genuine- Computer/Laptop Replacement or Internal parts<br>Part Number: 1202129L1 <br>Modular, full-featured T1/FT1 DSU/CSU with embedded SNMP<br> Synchronous V.35 DTE interface and DSX-1 port<br> Single expansion slot supports up to four additional interfaces<br> User-programmable bandwidth allocation per port via front panel, VT100, or SLIP management<br> Embedded SNMP via SLIP and 10Base-T<br> Two DS0 configuration maps provisioned to switch at predetermined times<br> 115 VAC, 9 watts<br><b>Note:</b><br>Picture may not match actual product. Please ensure that your original part number matches this exactly, or check with the manufactuer for compatiblity. Customers are responsible for compatiblity.