Attention Required! | Cloudflare

<p>The USB-201 DAQ Module has (8) single-ended analog inputs, (8) Individually-Configurable Digital I/O channels, (1) event Counter and (1) External Pacer I/O. Measurement Computing USB-201 has an analog input range of +/- 10 Volts, aggregate sampling rate of 100 kS/s (if using 2 channels, total sampling rate would be 50 KS/s per input channel) and channel queuing. Each USB-201 purchased includes the MCC DAQ Software Suite (TracerDAQ, InstaCal, Drivers for DASYLab and Universal Library for LabView and Android)</p> <p>&lt;strong&gt;Features&lt;/strong&gt;<br /> The channel queue feature lets you configure a list of unique ascending channel configuration for each scan. The channel settings are stored in a channel queue list that is written to local memory on the device.</p> <p> (1) external clock input and (1) clock output for the analog input pacer. You can connect an external clock signal to the external clock input terminal. When using the internal clock, this device outputs the ADC sample clock.</p> <p>8 TTL-level digital I/O lines. Each digital channel is software-selectable for input or output. When configured for input, you can use the digital I/O terminals to detect the state of any TTL-level input.</p> <p>A user-configurable internal jumper to configure the digital bits for pull-up or pull-down (default).</p> <p>(1) 32-bit TTL-level event counter that accepts inputs up to 1 MHz.</p> <p>&lt;strong&gt;Specifications&lt;/strong&gt;<br /> Analog Input Channels: 8 Single-Ended<br /> Analog Range: -10 Volts to 10 Volts<br /> Resolution: 12 Bit<br /> Sample Rate: 100 kS/s (Aggregate)<br /> Digital I/O Channels: 8<br /> Counter/Timer Inputs: 1<br /> Counter Resolution: 32 Bit<br /> Measurement Type: COunter, Digital I/O, Multifunction, Voltage</p>

<p>The USB-204 DAQ Module has (8) single-ended analog inputs, (8) Individually-Configurable Digital I/O channels, (1) event Counter and (1) External Pacer I/O. Measurement Computing USB-201 has an analog input range of +/- 10 Volts, aggregate sampling rate of 500 kS/s (if using 2 channels, total sampling rate would be 250 KS/s per input channel) and channel queuing. Each USB-204 purchased includes the MCC DAQ Software Suite (TracerDAQ, InstaCal, Drivers for DASYLab and Universal Library for LabView and Android)</p> <p><b>Features</b><br /> The channel queue feature lets you configure a list of unique ascending channel configuration for each scan. The channel settings are stored in a channel queue list that is written to local memory on the device.</p> <p> (1) external clock input and (1) clock output for the analog input pacer. You can connect an external clock signal to the external clock input terminal. When using the internal clock, this device outputs the ADC sample clock.</p> <p>8 TTL-level digital I/O lines. Each digital channel is software-selectable for input or output. When configured for input, you can use the digital I/O terminals to detect the state of any TTL-level input.</p> <p>A user-configurable internal jumper to configure the digital bits for pull-up or pull-down (default).</p> <p>(1) 32-bit TTL-level event counter that accepts inputs up to 1 MHz.</p> <p><b>Specifications</b><br /> Analog Input Channels: 8 Single-Ended<br /> Analog Range: -10 Volts to 10 Volts<br /> Resolution: 12 Bit<br /> Sample Rate: 100 kS/s (Aggregate)<br /> Digital I/O Channels: 8<br /> Counter/Timer Inputs: 1<br /> Counter Resolution: 32 Bit<br /> Measurement Type: COunter, Digital I/O, Multifunction, Voltage</p>