EGW 1-Piece Picatinny-Style Base Savage 110 Through 116 Round Rear Long Action

Machined from: domestic 6061 t6 extruded aluminum finish: silver anodized. Mounting hardware: hex head screws and wrench provided center spread: 4.630". Overall length: 7.458". This mount does not fit the 212 the 212 mount is available Here Our savage bases will work with any long action round back savage rifle with an ejection port. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately). The middle spread is the distance between the two middle holes, center to center, on your receiver. This mount is available in 0 or 20 moa. Please see our faq pages for more information on action lengths and moa. Our mount is drilled for and provided with 6-48 hex head screws. Some long action savage guns (like the338 lapua or 110 ba) require 8-40 screws. We recommend the hd savage round back long action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 3 weeks & you will need to contact egw to place your order over the phone. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. Egw's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Add egw's practical or hd scope rings to make it a complete overhaul! available in matte black and silver.