Manufacturer = Air Pura (page 1 / 1)
# Of Pieces: TitanClean Reflector - 1 Pc.; The TitanClean Titanium Dioxide Photo-Catalytic Oxidizer dramatically increases the range of dangerous airborne chemicals that can be neutralized safely and effectively. TitanClean's titanium dioxide (TiO2) coating in conjunction with the UV light, creates an oxidizing process that instantly breaks molecular bonds and reduces airborne chemicals to smaller safer compounds, until only carbon dioxide and water vapor are left. Titanium Dioxide Photocatalytic Oxidization developed and used in space technology laboratories for both air and water purification the Photocatalytic Oxidation (PCO) process is simple and elegant. A metal surface coated with a metal oxide is irradiated with UV light to produce hydroxyl radicals and super-oxide ions. The hydroxyl radicals and super-oxide ions break the molecular bonds of chemicals they come into contact with and slice them into smaller compounds, that are further broken down until only carbon dioxide and water vapor are left. For maximum efficiency, the process requires a sufficient surface area of reflective metal coated with a metal oxide to be positioned at a critical distance from the UV lamp while still allowing a good flow of air to bring the aiborne chemicals into contact with the resulting hydroxyl radicals and super-oxide ions. The TitanClean Reflector provides a large amount of TiO2 coated surface area (115% of the width of the UV lamp). The angled reflector design maximizes the range of photo-catalytic oxidation within the filter chamber and increases the germicidal effect of the lamp. The UV germicidal lamp maintains 98% of its direct irradiation intensity due to the interior position of the TitanClean reflector. The location of the TitanClean reflector and the UV light in the center of the filter chamber allows them to work in concert with the HEPA filter. Particulate pollution is stopped by the Hepa filter before reaching the reflector. This keeps the coated surface cleaner and more effective. The diffusion of the germicidal dosage from the UV lamp is enhanced in the confined chamber. Contact time of airborne chemicals is increased as they slow down passing through the Hepa. The TitanClean Catalytic Oxidizer combined with the 18 lbs. activated Carbon filter offers the most complete airborne chemical and VOC abatement available today.
For heavy chemical abatement. Safe effective air filtration for your better health. 2 MicroSupress filters, suppress bacteria, antigens and pathogens around carbon bed. Filter chamber sealed with felt gaskets. All metal housing ensures no plastic vapors are emitted. Virtually silent. Variable speed motor. Unimpeded airflow. Certified by the Environmental Technology Laboratory. HEPA Filter - as long as 5 years in normal use. Pre-filters - can be vacuumed from the exterior of the unit and should be changed every 12 months. Carbon Filter - should be changed as needed in heavy applications and at least every 24 months in normal use. Pressure seal on the filter chamber lets all unfiltered air pass through without leakage. Hepa-Barrier post filter.. 26 lbs. Carbon filter absorbs airborne chemicals, noxious gases and odors. Approximate treatment area is 2,000 square feet. Particle removal: HEPA-Barrier post particle filter. Odor and chemical suppression: 26 lbs. carbon filter 3 in. deep carbon bed. Free Air Flow: 560 cubic feet per minute free flow, delivers 440 cfm with filters. Pre-filter: 570 sq. in. and 1 in. deep. Housing: Powder cost steel. Voltage Options: 115 or 220 volts. Watts: 120 on High 40 on low. Noise: 28.1 db on low 62.3 db on high. Normal room sound is 25.1 db. 15 in. L x 15 in. W x 23 in. H (45 lbs.).
HEPA Filter - as long as 5 years in normal use. Pre-filters - can be vacuumed from the exterior of the unit and should be changed every 3 months. HI-C carbon weave (optional) should be changed every 4-6 months depending on use. Pressure seal on the filter chamber lets all unfiltered air pass through without leakage. True 100 square foot 3in. deep folded HEPA filter traps 99.97% of particles as small as 0.3 microns. Optional HI-C carbon weave absorbs airborne chemicals, noxious gases and odors and can be changed every 4-6 months. Approximate treatment area is 2000 sq. ft.. Filter chamber sealed with felt gaskets. All metal housing ensures no plastic vapors are emitted. Virtually silent. Variable speed motor. Unimpeded airflow. Certified by the Environmental Technology Laboratory. Particle removal: 100 sq. ft. true HEPA, 3 in. deep, 10 pleats per in., pleats warm rolled with separators. Free Air Flow: 560 cubic feet per minute free flow, delivers 440 cfm with filters. Pre-filter: 570 sq. in. and 1 in. deep. Housing: Powder cost steel. Voltage Options: 115 or 220 Volts. Watts: 120 on high 40 on low. Noise: 28.1 db on low 62.3 db on high. Normal room sound is 25.1 db. 15 in. L x 15 in. W x 23 in. H (45 lbs.).
P600 Photocatalytic Air Purifier offers the most effective airborne chemical, odor and VOC abatement available today together with supression of microorganisms and particle filtration. Developed by space research laboratories, to deliver a new and speedy airborne chemical abatement process. Fitted with the new Airpura TitanClean photocatalytic oxidizion technology. Working in concert with Airpura's 20 watt UV germicidal lamp. Combined with Hepa and activated carbon filters. Effective for up to 2000 sq. ft.. 40 sq. ft. HEPA filtration surface. 20 watt, 17 in. Germicidal U shaped lamp. 15 in. L x 15 in. W x 23 in. H (45 lbs.).