Width = 14.999999984700000 (page 1 / 1)
Hang and Stack Bin, Color Beige, Includes Dividers No, Includes Label Holder Yes, Material Plastic, Maximum Operating Temperature 250 Degrees F, Overall Height 5 in, Overall Length 10 7/8 in, Overall Width 5 1/2 in, Stackable Yes, Weight Capacity 30 lb, Mobility Stationary, Number of Divider Slots 1, Number of Long Divider Slots 1, Number of Short Divider Slots 0, Number of Dividers 0, Autoclaveable Yes, Caster Wheel Diameter Not Applicable, Divider Adjustment Increments Not Applicable
Hang and Stack Bin, Color Black, Includes Dividers No, Includes Label Holder Yes, Material Plastic, Maximum Operating Temperature 250 Degrees F, Overall Height 5 in, Overall Length 14 3/4 in, Overall Width 5 1/2 in, Stackable Yes, Weight Capacity 50 lb, Mobility Stationary, Number of Divider Slots 1, Number of Long Divider Slots 1, Number of Short Divider Slots 0, Number of Dividers 0, Autoclaveable Yes, Caster Wheel Diameter Not Applicable, Divider Adjustment Increments Not Applicable
Hang and Stack Bin, Color Clear, Includes Dividers No, Includes Label Holder Yes, Material Plastic, Overall Height 3 in, Overall Length 7 3/8 in, Overall Width 4 1/8 in, Stackable Yes, Weight Capacity 10 lb, Mobility Stationary, Number of Divider Slots 1, Number of Long Divider Slots 1, Number of Short Divider Slots 0, Number of Dividers 0, Caster Wheel Diameter Not Applicable, Divider Adjustment Increments Not Applicable, Electrostatic Discharge No, Hangable Yes, Hopper Height 2 7/8 in
With its superior cutting ability the DSH/E emits only a quiet hum while cutting wood up to 50 mm (1-1/2 in.), plastic up to 30 mm (13/16 in.), and non-ferrous metals up to 10 mm (13/32 in.). The DSH/E also cuts effortlessly Plexiglas, fiberglass, foam, leather, or cork. The free swinging saw blade holder takes standard saw blades with pin ends. However, blades without pin ends may also be clamped safely by means of a toggle screw. The slender saw arm allows for a clear view to the back of work piece, and a quick tension release lever is ideal for frequent inside cuts. The dust blower with adjustable nozzle ensures clear sight of the work piece and cutting line. The machine base is made from solid cast iron with rubber feet minimizing vibrations (may also be bolted down). The table is extremely stable with a large work area of 14 5/32 in. x 10 1/2 in. (360 x 270 mm) and can be tilted 45? for miter cuts. Vacuum cleaner and dust extractor are side-mounted allowing for a dust-free environment. The machine comes with 5 coarse and 5 fine saw blades each. Technical data: Volts 110 - 120-Volt AC, 50/60 Hz Motor 200W powerful special motor with electronic speed control keeping stroke speed constant under any load. Speeds 200 - 1,400 strokes/min. Stroke length 3/4 in. (19 mm). Throat 15 3/4 in. (400 mm). Cutting depth 2 in. (50 mm), 1 in. (25 mm) at 45? bevel. Overall dimensions L 21 in. (53 cm), W 10.5 (27 cm), H 12 in. (30 cm). Weight: 44 lbs. (20 kg).